Auto-Line™
Automatically "links" the machine to a broad range of primary single- and three-phase, 50 and 60 Hz input voltages without mannually linking. Also compensates for voltage spikes and drops within the entire range. Delivering consistent output - All done without removing the covers to relink. View Video >>  

Wind Tunnel Technology™
Internal air flow that protects electrical components and PC boards from dirt, dust, debris... greatly improving reliability. View Video >>  

LVC™ Line Voltage Compensation
Keeps output of the power source constant regardless of fluctuation in input power ± 10%. View Video >>  

Fan-On-Demand™
Internal power source cooling system that only works when needed, keeping internal components cleaner. View Video >>  

Adaptive Hot Start™ for Stick
Automatically increases output amperage at the start of a weld should the start require it and prevents the electrode from sticking and creating an inclusion.

Low OCV Stick
A built-in circuit that reduces the open-circuit voltage (OCV) to 13 volts when the welding power source is not in use, therefore eliminating the need for add-on voltage reducers.

Portable in the shop or at the job site - at 13.2 lb the shoulder strap allows the operator to easily move from location to location.

Auto-line circuitry automatically connects to 115 - 230 VAC, single-phase power without removing the cover to relink the power source.

Low OCV Stick returns OCV to 13 volts when machine is not in use.

Adaptive Hot Start for stick arc starts prevents electrode sticking.

Single Amperage Range allows operator to accurately set amperage on both 115 V or 230 V primary power.