For more information on these items, please contact your local Miller distributor.
|
 |
|
 |
| Description | Stock # | List Price | |
 | RCC-14 Remote Contactor and Current Control For Miller solid-state power sources after Serial No. JK674521. Side-to-side rotary-motion fingertip control fastens to TIG torch with Velcro® straps. Includes 26.5 ft contol cord and 14-pin plug. Great for production or contractors needing quick ramp-up. |
151086 | $155.00 (US$) |
 | RHC-14 Hand Control For all Miller solid-state power sources after Serial No. JK674521. Miniature hand control for remote current and contactor control. Dimensions: 4 x 4 x 3-1/4 in (102 x 102 x 82 mm). Includes 20 ft (6 m) cord and 14-pin plug. |
129340 | $184.00 (US$) |
 | Cylinder Rack For use with No. 4B or No. 27 Running Gear - Consists of base tray with bottle bracket, and vertical support rack with safety chain. Note: Cannot be used with LP Tank Mounting Bracket. |
043040 | $174.00 (US$) |
| No. 4B Running Gear For Bobcats, Miller Legend 301G and Trailblazer Series - Two rear wheels with 480/400x8 pneumatic tires. Two 8 in (203 mm) solid rubber tired front wheels and 30 in (762 mm) towing handle. |
041930 | $289.00 (US$) |
 | No. 27 Hand Running Gear Rugged, lightweight design provides maximum maneuverability. Comes with standard handle, two large 480/400 x 8 pneumatic tires, two 5 in rubber swivel casters, adjustable axle and easy-to-read instructions. Shown with optional LP tank moutning bracket. |
043014 | $299.00 (US$) |
 | Protective Cover, Engine Drive 18W x 48L x 26H Heat-resistant blue protective cover with reinforced sleeve for exhaust pipe. Easy-off handles, easy-access cable cutouts, and tie down grommets secure cover for transport. |
195136 | $99.00 (US$) |
 | Hwy-1000 Trailer For Bobcats, Miller Legend 301G and Trailblazer Series. This 1000 lb capacity highway trailer with welded steel tubing frame, heavy-duty axle with roller bearing hubs and leaf-spring suspension comes with jack stand, 2 in ball hitch, fenders and lights. |
195013 | $1282.00 (US$) |
 | Suitcase 12 VS Wire Feeder At less than 30 pounds, this lightweight, portable feeder can withstand the harshest environments, and it allows you to use a 12-inch spool of wire. Fits through an 18x24 inch porthole. |
194941 | $1556.00 (US$) |
 | Suitcase 8 VS Wire Feeder At less than 25 lb and fits through a 18 x 24 in porthole. The small modular design and tough flame-retardant, non-metallic case material will withstand burning, breaking or losing rigidity with heat or sun. |
194890 | $1288.00 (US$) |
 | LP Tank Mounting Bracket (Horizontal) Includes brackets and clamps to mount the tank and hose with fittings to converter. For 33 or 43 lb tanks only. For use with No. 27 or No. 4B Running Gear. Cannot be used with Cylinder Rack. |
043647 | $329.00 (US$) |
| FA-7.5 Flame Arrestor Fuel Cap (Gasoline Red) Lockable for added protection. |
042632 | $296.00 (US$) |
| Spark Arrestor Mandatory when operating on California grasslands, brush or forest-covered land, and all National Forests. For other areas, check your state and local laws. |
043579 | $39.00 (US$) |
| Weld Leads Consists of 50 ft 2/0 electrode cable and holder, and 50 ft work cable and clamp. |
195195 | $130.00 (US$) |
| Stick Welding Leads Includes 100 ft 2/0 electrode cable and holder, 50 ft work cable and clamp, 300 A, 100% duty cycle. |
043952 | $350.00 (US$) |
All prices are U.S. dollars and reflect Manufacturer's Suggested Retail Price (MSRP) for the U.S. market. Tax, delivery and setup not included. Actual selling price determined by the Distributor. Prices are subject to change without notice. Additional items may be required for welding, such as shielding gas, consumables, and safety equipment. | |||