|
 |
New Miller Legend 301 G replaces Miller Legend NT (discontinued).
NOTE: Comparison is to Miller products as the Miller Legend has no competition.
|
How does the Miller Legend® 301 G stack up to the competition? | 
|
| Comparison Chart | Miller Legend 301 G DC, CC/CV | Miller Legend NT AC/DC, CC | Trailblazer 301 G AC/DC, CC/CV |
| Overall Performance | Excellent | Good/Very Good | Excellent |
| Why buy this machine? | Low noise and excellent arc performance make this machine the perfect choice for maintenance/service trucks, in-plant use and construction (especially in residential areas). | Replaced by the Miller Legend 301 G. | The professional's choice for superior arc performance in all processes. Designed for fabrication, construction, structural, maintenance, sheet metal, process plant piping, and TIG aluminium. |
| Key Features | Low speed generator, quiet, fuel efficient, simple operator interface. | Low speed generator, quiet, fuel efficient, simple operator interface. | Maximum versatility - Full multiprocess, 10,000 watts of separate generator power. |
| Engine Operating Speed(s)
Weld/Idle Weld/Idle Generator |
3000/1800 RPM up to 220 amps 3600/2400 RPM up to 300 amps 5kW @ 1800 RPM & |
3000/1800 RPM up to 200 A
5kW @ 1800 RPM & |
3600/2250 RPM up to 300 amps 10kW @ 3600 RPM |
| Amperage/Voltage Range (DC) |
20-220 A, 10-30 V @ 3000 RPM 20-300 A, 10-33 V @ 3600 RPM |
20-200 A @ 3000 RPM | 20-300 A, 10-33 V @ 3600 RPM |
|
Rated output at 104°F (40°C) CV/DC MIG/FCAW CC/DC Stick/TIG CC/AC TIG/Stick |
100% Duty Cycle 300 A at 25 V 280 A at 25 V N/A |
100% Duty Cycle N/A 200 A at 25 V 225 A at 25 V |
100% Duty Cycle 300 A at 25 V 280 A at 25 V 200 A at 25 V (60% duty cycle) |
| Process Performance | |||
|
Stick - 6010 3000 RPM 3600 RPM |
Very Good Excellent |
Good/Very Good N/A |
N/A Excellent |
|
Stick - 7018
3000 RPM 3600 RPM |
Very Good Excellent |
Good N/A |
N/A Excellent |
| Compatible Feeders | Voltage Sensing Only | Voltage Sensing Only | All Types |
| Flux Cored - general purpose | Excellent | Fair | Excellent |
| Flux Cored - nickel alloy | Excellent | Not Recommended | Excellent |
|
MIG-short arc/spray 3000 RPM 3600 RPM |
Very Good Excellent |
Not Recommended N/A |
N/A Excellent |
| TIG - DC | Excellent | Very Good | Excellent |
| TIG - AC | N/A | Good with remote option | Excellent |
|
Generator Power at 104°F (40°C) Peak Watts Continuous Watts While welding at 150 amps |
5,500 at 1800 RPM 5,000 at 1800 RPM 2,400 at all speeds |
5,000 at 1800 RPM 5,000 at 1800 RPM 1,000 at 3000 RPM |
10,000 at 3600 RPM 9,500 at 3600 RPM 6,700 at 3600 RPM |
| Simultaneous Generator and Welding Capabilities | Very good - generator power is independent of rheostat setting. | Good - generator power is independent of rheostat setting. | Excellent - generator power is independent of rheostat setting. |
| Speed Control Devices | Electronic governor sets precision engine speeds and eliminates mechanical solenoids. | Mechanical governor and mechanical solenoids. | Heavy duty mechanical solenoids, automatic governor. |
|
|
|