For more information on these items, please contact your local Miller distributor.
|
 |
|
 |
| Description | Stock # | List Price | |
 | RMLS-14 Switch For Miller solid-state power sources after Serial No. JK674521. Momentary- and maintained-contact rocker switch for contactor control. Push forward for maintained contact and backward for momentary contact. Includes 26.5 ft (8 m) cord and 14-pin plug. |
129337 | $122.00 (US$) |
 | Cylinder Rack For use with No. 4B or No. 27 Running Gear - Consists of base tray with bottle bracket, and vertical support rack with safety chain. Note: Cannot be used with LP Tank Mounting Bracket. |
043040 | $174.00 (US$) |
| No. 4B Running Gear For Bobcats, Miller Legend 301G and Trailblazer Series - Two rear wheels with 480/400x8 pneumatic tires. Two 8 in (203 mm) solid rubber tired front wheels and 30 in (762 mm) towing handle. |
041930 | $289.00 (US$) |
 | No. 27 Hand Running Gear Rugged, lightweight design provides maximum maneuverability. Comes with standard handle, two large 480/400 x 8 pneumatic tires, two 5 in rubber swivel casters, adjustable axle and easy-to-read instructions. Shown with optional LP tank moutning bracket. |
043014 | $299.00 (US$) |
 | SPOOLMATIC-15A |
195156 | $869.00 (US$) |
| 3045 FC WIRE FEEDER |
194919 | $749.00 (US$) |
 | Protective Cover, Engine Drive 18W x 48L x 26H Heat-resistant blue protective cover with reinforced sleeve for exhaust pipe. Easy-off handles, easy-access cable cutouts, and tie down grommets secure cover for transport. |
195136 | $99.00 (US$) |
 | HF-251D-1 High-Frequency Arc Starter and Stabilizer Portable 115 Volt, 250 amp unit , 60% duty cycle unit adds high-frequency to the welding circuit to help start the arc when using the TIG process. (requires Secondary Contactor and RMLS-14 Switch). |
042388 | $893.00 (US$) |
 | Hwy-1000 Trailer For Bobcats, Miller Legend 301G and Trailblazer Series. This 1000 lb capacity highway trailer with welded steel tubing frame, heavy-duty axle with roller bearing hubs and leaf-spring suspension comes with jack stand, 2 in ball hitch, fenders and lights. |
195013 | $1282.00 (US$) |
 | Suitcase 12 VS Wire Feeder At less than 30 pounds, this lightweight, portable feeder can withstand the harshest environments, and it allows you to use a 12-inch spool of wire. Fits through an 18x24 inch porthole. |
194941 | $1556.00 (US$) |
 | Suitcase 8 VS Wire Feeder At less than 25 lb and fits through a 18 x 24 in porthole. The small modular design and tough flame-retardant, non-metallic case material will withstand burning, breaking or losing rigidity with heat or sun. |
194890 | $1288.00 (US$) |
 | Spoolmate™ 3035 Spool Gun (20 ft) Spool gun for aluminum and other wires. 4 in spools; .030 - .035 in (0.8 - 0.9 mm) aluminum, steel and stainless steel. Rated at 150 amps, 60% duty cycle with 20 ft (6 m) cable assembly. |
195016 | $499.00 (US$) |
 | Spoolmatic® 30A Spool Gun Ideal for aluminum welding jobs. 200 amp, 100% duty cycle, air-cooled, 1 lb spool gun with 30 ft (9.1 m) cable assembly. For detailed information, see Spoolmatic literature, Index No. M/1.2. |
130831 | $995.00 (US$) |
| FA-7.5 Flame Arrestor Fuel Cap (Gasoline Red) Lockable for added protection. |
042632 | $296.00 (US$) |
| Full KVA Plug Kit 240 VAC, 50 amp plug (NEMA 14-50P) to fit full KVA receptacle on Bobcats. |
119172 | $55.16 (US$) |
| Secondary Contactor Required to use HF-251D-1 with Bobcats. |
041969 | $298.00 (US$) |
 | SGA 100C Control with Contactor The SGA with contactor is required to connect a Spoolmate™ spool gun to CV engine drives like Miller's Bobcat™. Includes 10 ft (3 m) 115 VAC power cable and plug, 6 ft (1.8 m) interconnecting cable, and a 5 ft (1.5 m) gas hose. |
043857 | $259.00 (US$) |
| Spark Arrestor Mandatory when operating on California grasslands, brush or forest-covered land, and all National Forests. For other areas, check your state and local laws. |
043579 | $39.00 (US$) |
| WC-115A with Contactor Designed primarily for CC/DC power sources. It can also be used with CV power sources or DC engine drives supplying 115 VAC. When used with a CC source, the control circuit functions in a voltage-sensing mode. Includes contactor. |
137546011 | $925.00 (US$) |
| Weld Leads Consists of 50 ft 2/0 electrode cable and holder, and 50 ft work cable and clamp. |
195195 | $130.00 (US$) |
| Stick Welding Leads Includes 50 ft 2/0 electrode cable and holder, 50 ft work cable and clamp, 350 A, 100% duty cycle. |
173851 | $304.00 (US$) |
All prices are U.S. dollars and reflect Manufacturer's Suggested Retail Price (MSRP) for the U.S. market. Tax, delivery and setup not included. Actual selling price determined by the Distributor. Prices are subject to change without notice. Additional items may be required for welding, such as shielding gas, consumables, and safety equipment. | |||